Reviewed by the Gutter Installers San Antonio teamUpdated
Aluminum gutters in San Antonio typically cost $7–$12 per linear foot for 5-inch seamless K-style and $9–$15 for 6-inch, installed (2026 estimates). Aluminum does not rust, comes in many baked-enamel colors and is roll-formed on-site. Ask for .032-gauge metal: it resists hail and ladder dents better than thinner .027 stock. Galvalume or steel costs more but dents less.
| 5″ seamless aluminum | $7–$12 per linear foot installed |
|---|---|
| 6″ seamless aluminum | $9–$15 per linear foot installed |
| Recommended gauge | .032 (heavier than .027 stock) |
| Steel / Galvalume | $12–$20 per linear foot installed |
| Profiles | K-style or half-round |
| Project time | 1 day for most homes |
Aluminum gutters are the standard on San Antonio homes, from Stone Oak two-stories to ranch houses in Converse and Hill Country homes in Helotes and Bulverde. Aluminum does not rust, weighs little enough to hang on ordinary fascia, takes a baked-enamel finish in dozens of colors, and can be roll-formed from a coil into one continuous piece per roofline. This page covers the material itself: gauge, size, color, cost, and when steel or Galvalume is the better pick.
If you want to know how on-site forming works and why it means fewer leaks, see seamless gutters. If you are pricing a complete project, start with gutter installation or gutter replacement.
How much do aluminum gutters cost in San Antonio?
In the San Antonio area, seamless aluminum gutters typically cost $7–$12 per linear foot in 5-inch and $9–$15 per linear foot in 6-inch, installed. A single-story home with 150–180 feet of gutter usually lands around $1,300–$2,600 with downspouts. These are our typical 2026 installed estimates, not a quote.
| Option | San Antonio typical | National benchmark (source, date) |
|---|---|---|
| 5″ seamless aluminum K-style | $7–$12 | Aluminum $7–$12; seamless $9–$13+ (HomeAdvisor, June 2026) |
| 6″ seamless aluminum K-style | $9–$15 | 6-inch adds about $1–$2/lf (HomeGuide, Oct 2025) |
| Half-round aluminum | $14–$22 | Half-round adds about $1–$2/lf (HomeGuide, Oct 2025) |
| Steel / Galvalume | $12–$20 | Galvanized steel $5–$20 (HomeAdvisor, June 2026) |
| Downspouts | $8–$14 per lf | $30–$75 each installed (HomeGuide, Oct 2025) |
National figures come from HomeAdvisor’s aluminum gutter cost guide (updated June 20, 2026) and HomeGuide’s gutter installation cost guide (October 28, 2025). National averages mix cheap and expensive markets and simple and complex roofs, so treat them as a sanity check. Your price depends on footage, stories, corners, downspouts and fascia condition. The full breakdown is in our San Antonio gutter cost guide.
What gauge of aluminum gutter should you buy?
Choose .032-gauge aluminum for most San Antonio homes. Gauge is the thickness of the sheet, and .032 is heavier than the .027 stock some installers use to lower their bid. The thicker metal holds its shape better when a ladder leans on it, when wet oak debris piles up, and when hail comes through.
| Gauge | What it means | Where it fits |
|---|---|---|
| .027 | Thinner, lighter, lower cost | Budget jobs and sheltered runs; dents more easily |
| .032 | Heavier residential stock | Our recommendation for most homes, two-story runs and hail-prone areas |
Two quotes for "seamless aluminum gutters" can be for different metal. Ask each contractor to write the gauge, the gutter size (5″ or 6″), the hanger type and spacing, and the downspout size on the estimate. That is the only way to compare prices fairly.
Do aluminum gutters hold up to San Antonio hail?
Aluminum gutters do not rust, but they can dent in hail. Heavier .032-gauge metal and properly spaced hidden hangers dent less and keep their pitch better than thin gutters on spikes. Small cosmetic dents rarely affect drainage. Split seams, crushed fronts or bent outlets do.
Homes on exposed ridgelines, such as parts of Helotes, Boerne and Bulverde, and homes that have filed more than one hail claim are where we talk about steel or Galvalume. After a storm, photograph the gutters before anything is repaired. Our guide to hail damage and insurance claims explains what adjusters look for, and storm damage gutter repair covers the fix.
Aluminum vs. Galvalume, steel and stainless steel gutters
Aluminum is the best value for most San Antonio homes. Steel-based gutters are stiffer and resist dents better, but they weigh more, cost more to install and need care at cut edges and scratches.
- Aluminum: rust-free, light, many colors, formed on-site. The default for homes with composition shingle or tile roofs.
- Galvalume: steel coated with an aluminum-zinc alloy. Stiffer than aluminum and a natural match for standing-seam metal roofs, farmhouse-style homes and outbuildings. Cut edges and scratches should be protected to limit corrosion.
- Galvanized steel: zinc-coated steel. Strong, but the coating wears and it can eventually rust where water sits.
- Stainless steel: a specialty option, mostly for commercial or custom work. We quote it on request; most homeowners get better value from heavy-gauge aluminum or Galvalume.
- Copper: a premium metal for historic and custom homes. See copper gutters.
Do not mix metals where they touch. Aluminum gutters should use aluminum or compatible hangers, fasteners and downspouts. Copper next to aluminum or galvanized steel corrodes when water runs between them.
Should you choose 5-inch or 6-inch aluminum gutters?
Use 5-inch aluminum on most single-story homes with average roof areas. Use 6-inch on two-story homes, steep or large roofs, valleys that empty into one run, and lots under heavy live oak or pecan canopy. The 6-inch size carries noticeably more water and pairs with larger 3x4 downspouts.
Mixed systems are common. Many San Antonio homes need 6-inch only on the back runs where valleys converge. Our 5-inch vs 6-inch gutter guide walks through the sizing.
What colors do aluminum gutters come in?
Aluminum gutter coil comes pre-painted in a wide range of baked-enamel colors, including white, almond, clay, bronze, brown and black. Because the coil is painted before it is formed, the color is even along the full run, and downspouts can be matched to the gutter, the trim or the masonry.
- Match the fascia so the gutter disappears into the trim.
- Match the roof edge for a crisp line on dark roofs.
- Check your HOA. Many northside and suburban communities in Stone Oak, Alamo Ranch, Schertz and Cibolo have approved color palettes.
- See it in daylight. We bring samples to the estimate so you can hold them against your home.
Half-round aluminum gutters
Aluminum is also formed in a rounded half-round profile with round downspouts, which suits Victorian, Craftsman and revival-style homes in Alamo Heights, Terrell Hills, Monte Vista and King William. It typically runs $14–$22 per linear foot installed. Sizing, brackets and capacity are covered on our half-round gutters page.
How long do aluminum gutters last?
Well-installed aluminum gutters commonly last 20 years or more. HomeGuide’s cost guide puts aluminum at roughly 20 to 30 years. The things that shorten their life are weak fastening, poor pitch, packed debris, rotted fascia behind the gutter and repeated hail.
- Hidden hangers screwed into sound fascia about every 2 feet hold far better than spike-and-ferrule fasteners.
- Steady pitch toward the outlets keeps water from standing at corners and joints.
- Cleaning under oaks and pecans keeps weight and moisture off the metal. See gutter cleaning and gutter guards.
- Corner and end-cap sealant is the part that ages first. Check it every few years.
Aluminum gutters across the San Antonio area
We install aluminum gutters in San Antonio neighborhoods and nearby cities including Alamo Heights, Terrell Hills, Helotes, Converse, Boerne and Bulverde. Older neighborhoods under heavy canopy usually need 6-inch runs or guards. Hill Country lots need hail-resistant gauge and downspouts routed so water does not cut channels across rocky ground. Newer subdivisions mostly need full coverage and HOA-matched colors. Request a free estimate and we will measure every run and write down the gauge, size and color.
Our Aluminum Gutters Process
Free on-site estimate
We measure every roofline, check the fascia and note where water needs to go.
Pick gauge, size and color
Choose .032 aluminum in 5″ or 6″, K-style or half-round, and a color that suits your trim or HOA.
Prep and fascia check
Old gutters come off and any soft fascia is repaired so hangers have solid wood to hold.
Form and hang
Each run is roll-formed to length, hung on hidden hangers with proper pitch, and sealed at corners and end caps.
Downspouts and water test
Downspouts and discharge are set, the site is cleaned and the system is water-tested.
Aluminum Gutters Service Areas
We provide aluminum gutters throughout San Antonio and the surrounding communities. Choose your area for local details:
- Alamo Ranch
- King William
- Leon Springs
- Medical Center
- Monte Vista
- Stone Oak
- The Dominion
- Timberwood Park
- Alamo Heights
- Boerne
- Bulverde
- Castle Hills
- Cibolo
- Converse
- Fair Oaks Ranch
- Garden Ridge
- Helotes
- Hill Country Village
- Hollywood Park
- Leon Valley
- Live Oak
- New Braunfels
- Olmos Park
- Schertz
- Selma
- Shavano Park
- Terrell Hills
- Universal City
- Windcrest
Aluminum Gutters FAQ
How much do aluminum gutters cost in San Antonio?
Seamless aluminum gutters typically cost $7–$12 per linear foot in 5-inch and $9–$15 in 6-inch, installed, based on 2026 San Antonio-area estimates. A single-story home with 150–180 feet usually runs $1,300–$2,600 with downspouts. HomeAdvisor’s June 2026 national figure for aluminum is a similar $7–$12 per foot. Your quote depends on footage, height and fascia condition.
Is .032 or .027 aluminum better for gutters?
.032-gauge is better for most homes. It is thicker than .027, so it resists dents from ladders, hail and falling branches and holds its shape under wet debris. The price difference per foot is modest. Ask every contractor to write the gauge on the quote, since thinner stock is a common way to lower a bid.
Are aluminum gutters better than steel or Galvalume?
For most San Antonio homes, yes. Aluminum does not rust, is lighter on the fascia, comes in more colors and costs less. Galvalume and steel resist dents better and suit metal roofs and repeated-hail areas, but they cost more to install and need protected cut edges. We recommend steel-based gutters only where the dent resistance is worth the price.
Do aluminum gutters rust?
No. Aluminum does not rust the way steel does, which is why it is the standard residential gutter material. It can corrode where it touches copper or bare steel, so fasteners and downspouts should be aluminum or compatible materials. The baked-enamel finish can fade slowly in strong sun but generally holds up well.
Can aluminum gutters be painted?
Yes. Most homeowners never need to, because aluminum coil comes pre-painted in many colors. If you repaint your house, aluminum gutters can be cleaned, primed with a primer made for aluminum and painted. Downspouts are often painted to match brick or stone.
How long do aluminum gutters last in Texas?
Well-installed aluminum gutters commonly last 20 years or more. HomeGuide puts the typical range at about 20 to 30 years. In San Antonio, the biggest factors are hanger quality, pitch, regular cleaning under oak and pecan trees, sound fascia and hail exposure. Resealing corners every few years extends their life.
Aluminum Gutters Guides for San Antonio Homeowners
Related Services
Seamless Gutters
Continuous aluminum gutters formed at your home in a truck-mounted machine, cut to the exact length of each roofline.
Learn more →Half-Round Gutters
The rounded, traditional gutter profile in aluminum, Galvalume or copper, sized so it still keeps up with Texas downpours.
Learn more →Gutter Installation
Seamless aluminum gutters measured, roll-formed and installed on-site to handle San Antonio’s hard, fast downpours.
Learn more →Gutter Replacement
Old gutters out, new seamless gutters in, usually in a single day, with fascia checked and repaired along the way.
Learn more →