Our Gutter Installation Process
Eight steps, no surprises: a local partner contractor handles everything from the inspection to the final water test.
Get Your Free Gutter Estimate
Fast response · No-pressure written quote
Request your free estimate
Send the form. We pass your request to a local partner contractor, who contacts you to arrange an on-site visit.
On-site inspection & measurement
The contractor measures every roofline run, counts corners and downspouts, checks fascia and drip edge for rot or gaps, and notes where water needs to discharge on your lot.
Itemized written quote
The contractor gives you a written quote showing linear footage, 5″ or 6″ size, metal gauge, color, hanger type and spacing, downspout size and count, removal and any fascia work. Nothing hidden.
Removal & prep
On install day, old gutters come down and are hauled away. Any soft or rotted fascia is replaced so new hangers fasten into solid wood.
Seamless fabrication on-site
A roll-forming machine turns a coil of pre-painted aluminum (or copper or steel) into one continuous gutter for each run, cut to exact length.
Installation & pitch
Gutters are hung with hidden hangers screwed into the fascia and pitched toward the outlets (about 1/4″ per 10 feet). Corners are mitered and sealed.
Downspouts & drainage
Downspouts are sized for the roof area, strapped to the wall and finished with extensions, splash blocks or underground drain lines that carry water away from the foundation.
Water test, cleanup & walkthrough
The contractor flushes each run to confirm flow, cleans up every scrap and screw, and walks the finished job with you.
Process FAQ
Do I need to be home during gutter installation?
Not usually. The contractor needs access to all sides of the house and an outdoor outlet for the roll-forming machine. Most homeowners are there for the start and the final walkthrough. Gates and pets need to be sorted out ahead of time.
What happens if it rains on installation day?
Light rain doesn't stop work, but contractors won't work on ladders in lightning, high wind or heavy downpours. If San Antonio weather turns, the contractor reschedules to the next open day.
Do you need a permit to replace gutters in San Antonio?
Gutter replacement generally does not need a city permit. HOAs often have color rules, and homes in local historic districts may need design review for exterior changes. Check with your HOA or the City of San Antonio Office of Historic Preservation before work starts.
Ready to start? Request your free estimate, or read about gutter installation in San Antonio.
Ready for gutters that actually work?
Free on-site measurement and a written, itemized estimate — usually within 48 hours.