How Much Do Gutters Cost in San Antonio? (2026 Price Guide)
By the Gutter Installers San Antonio team Published Updated
In San Antonio, 5-inch seamless aluminum gutters typically cost $7–$12 per linear foot installed and 6-inch run $9–$15. A single-story home of about 2,000 sq ft (roughly 150–180 feet of gutter) usually lands between $1,300 and $2,600 with downspouts, while a two-story home of about 2,500 sq ft often runs $2,000–$4,000. Guards, fascia repair, and drains are extra.
- 5-inch seamless aluminum is $7–$12 per linear foot installed in the San Antonio area; 6-inch is $9–$15.
- Most single-story homes around 2,000 sq ft need 150–180 feet of gutter and land between $1,300 and $2,600.
- Two-story homes, steep roofs, many corners, and rotten fascia are the biggest drivers of a higher quote.
- Downspouts ($8–$14/lf), gutter guards ($8–$25/lf), and underground drains ($15–$35/lf) are usually priced separately.
- Compare quotes line by line: linear footage, gauge, hanger type, downspout count, and haul-off should all be written down.
How much do gutters cost in San Antonio in 2026?
Most San Antonio homeowners pay $7–$12 per linear foot for professionally installed 5-inch seamless aluminum gutters, the most common choice on local homes. Stepping up to 6-inch seamless aluminum runs $9–$15 per foot. For a typical home, that puts a full gutter installation somewhere between about $1,300 and $4,000, depending mostly on the size and height of the house.
These are typical 2026 installed estimates for the San Antonio area, not fixed prices. Every roof is different, and the only number that matters is a written quote based on a measurement of your house.
What do gutters cost per foot by material?
Material is the first price decision. Seamless aluminum covers the large majority of San Antonio homes because it does not rust, comes in dozens of colors, and is formed to length on site. Premium materials such as copper are mostly chosen for historic homes in neighborhoods like King William and Monte Vista.
| Gutter type | Installed price per linear foot | Best fit |
|---|---|---|
| 5-inch seamless aluminum (K-style) | $7–$12 | Most single-story and average two-story homes |
| 6-inch seamless aluminum (K-style) | $9–$15 | Large or steep roofs, two-story homes, valleys |
| Half-round aluminum | $14–$22 | Traditional and historic styling |
| Steel / Galvalume | $12–$20 | Impact resistance, some commercial work |
| Copper (half-round or K-style) | $28–$45 | Historic homes, high-end custom builds |
| DIY vinyl sectional (materials only) | roughly $3–$6 | Sheds, small runs, budget DIY |
Seamless gutters are roll-formed from a coil of aluminum on a machine in the installer's truck, so each run is one continuous piece with joints only at corners. See seamless vs. sectional gutters for why that matters for leaks.
How much does it cost to put gutters on a 2,000 sq ft house?
Gutters for a 2,000 sq ft single-story house in San Antonio typically cost $1,300–$2,600 in 5-inch seamless aluminum, including a standard set of downspouts. A home that size usually needs about 150–180 linear feet of gutter. The table below shows estimated ranges for common home sizes.
| Home | Estimated gutter length | 5-inch seamless aluminum | 6-inch seamless aluminum |
|---|---|---|---|
| 1-story, 1,500 sq ft | 120–150 lf | $1,000–$2,100 | $1,250–$2,600 |
| 1-story, 2,000 sq ft | 150–180 lf | $1,300–$2,600 | $1,600–$3,200 |
| 1-story, 2,500 sq ft | 180–220 lf | $1,600–$3,100 | $2,000–$3,900 |
| 2-story, 2,500 sq ft | 200–250 lf | $2,000–$4,000 | $2,500–$4,900 |
| 2-story, 3,000 sq ft | 230–290 lf | $2,400–$4,800 | $2,900–$5,800 |
Square footage is only a proxy. What installers actually price is the length of the eaves that need gutter, the number of downspouts, and how hard the roof is to work on. A 2,000 sq ft ranch with a simple rectangle roof will sit near the low end; the same square footage with a cut-up hip roof, a garage bump-out, and a covered patio will sit near the high end.
How much do 100 or 200 feet of seamless gutters cost?
100 feet of 5-inch seamless aluminum gutter typically costs $700–$1,200 installed in San Antonio, and 200 feet costs about $1,400–$2,400, before downspouts. In 6-inch, budget roughly $900–$1,500 for 100 feet and $1,800–$3,000 for 200 feet.
Small jobs often cost more per foot than large ones. Setup, the trip, and ladder work are similar whether a crew hangs 40 feet or 140 feet, so many installers have a job minimum. If you only need one section replaced, a gutter repair visit may be the cheaper path.
What add-ons affect the total price?
Downspouts, gutter guards, removal of old gutters, fascia repair, and underground drains are usually quoted as separate line items. Together they can equal or exceed the cost of the gutters themselves.
| Add-on | Typical price | Notes |
|---|---|---|
| Downspouts (2x3 or 3x4) | $8–$14 per lf | Roughly one per 30–40 feet of gutter run |
| Gutter guards, pro-installed | $8–$25 per lf | Screens at the low end; stainless micro-mesh $12–$25 |
| Old gutter removal and haul-off | $1–$2 per lf | Often bundled into replacement quotes |
| Fascia board repair or replacement | $8–$20 per lf | Typical job $250–$1,200 |
| Underground downspout drain lines | $15–$35 per lf | Carries water away from the foundation |
| Gutter cleaning (existing gutters) | $125–$275 one story; $175–$375 two story | Not needed on brand-new gutters |
In San Antonio, the add-on most worth considering is drainage. Expansive clay soils swell when wet and shrink when dry, so dumping a downspout next to a slab works against the whole point of gutters. Our downspouts and drainage page and the guide to gutters and foundation problems cover this in detail.
What drives the price of a gutter installation?
Height, roof complexity, and the condition of the wood behind the gutter drive most of the difference between a low and a high quote. Here is what moves the number:
- Stories and height. Second-story eaves need taller ladders, more setup, and slower work. Expect two-story pricing toward the top of each range.
- Roof pitch. Steep roofs are harder to work from and shed water faster, which can push you toward 6-inch gutters.
- Corners and miters. Every inside or outside corner is a miter that must be cut, joined, and sealed. A roof with 12 corners costs more than one with 4, even at the same length.
- Fascia condition. Gutters hang on the fascia board. If it is soft or rotted, it has to be repaired first. See fascia and soffit repair.
- Downspout count and length. More downspouts, longer two-story drops, and extensions add material and labor.
- 5-inch vs. 6-inch. 6-inch costs about $2–$3 more per foot but carries roughly half again as much water. See 5-inch vs. 6-inch gutters.
- Gauge. Heavier .032-gauge aluminum resists ladder dents and hail better than .027-gauge and costs somewhat more.
- Hangers. Hidden hangers spaced about every 2 feet are standard on quality work; old spike-and-ferrule systems are cheaper but loosen over time.
How do you measure the linear footage of gutters?
Measure the length of every roof edge (eave) where water runs off and a gutter will hang, then add them together. Do not measure the sloped rake edges on gable ends; water does not run off those.
- Walk the house and list each eave that drains water: front, back, garage, porch, patio covers.
- Measure each eave along the ground with a tape or measuring wheel, directly under the roof edge, and add a few inches for end caps.
- Add the runs together for total gutter footage.
- Count downspouts: plan roughly one per 30–40 feet of gutter, plus one at the end of any run that serves a valley. Multiply by the wall height (about 10 feet per story) for downspout footage.
As a rough check, a square-ish single-story home of about 2,000 sq ft has a perimeter near 180 feet. Not every edge needs gutter, which is why 150–180 feet is a typical estimate.
Worked example: a 2,000 sq ft single-story home
Say a ranch home on the far West Side has 165 feet of eaves, five downspouts, and old sectional gutters that need to come off.
- Gutters: 165 lf of 5-inch seamless aluminum at $9/lf = $1,485
- Downspouts: 5 x 10 ft = 50 lf at $10/lf = $500
- Removal and haul-off: 165 lf at $1.50/lf = about $248
- Estimated total: about $2,233, inside the $1,300–$2,600 range for this size home
- Optional stainless micro-mesh guards: 165 lf at $15/lf = about $2,475 more
Gutter feet x per-foot price, plus downspout feet x $8–$14, plus removal at $1–$2 per foot. Add fascia, guards, or drains only if your home needs them. This gets you within range before you call anyone.
Do two-story homes cost more for gutters?
Yes. Two-story homes typically cost more per foot and in total, because the work is slower, the ladders are taller, and every downspout is about twice as long. In San Antonio, a two-story home of about 2,500 sq ft usually needs 200–250 feet of gutter and lands around $2,000–$4,000 in 5-inch seamless aluminum with downspouts.
Two-story homes also tend to have a lower roof section, such as a porch or garage, that collects water from the upper roof. That lower gutter carries more than its share of water, which is why installers often recommend 6-inch gutters or larger 3x4 downspouts on two-story homes, even when 5-inch would be fine on a ranch.
| Factor | Single-story | Two-story |
|---|---|---|
| Per-foot gutter price | Low to middle of range | Middle to top of range |
| Downspout length | About 10 ft each | About 20 ft each |
| Typical gutter size | 5-inch | 5-inch or 6-inch; 6-inch common on lower roofs that catch upper runoff |
| Setup and access | Standard ladders | Taller ladders, more moves, slower runs |
| Typical whole-house range | $1,300–$2,600 (about 2,000 sq ft) | $2,000–$4,000 (about 2,500 sq ft) |
Is gutter replacement cheaper than new installation?
Gutter replacement usually costs slightly more than installing gutters on a house that never had them, because the old system has to be removed and the fascia behind it often needs work. Expect the same per-foot price for the new gutters, plus $1–$2 per foot for removal and haul-off, plus any fascia repair at $8–$20 per foot.
Many older San Antonio homes have original sectional gutters held up by spikes driven through the fascia. When those come off, installers often find soft wood, water stains, or gaps where critters have gotten into the soffit. A good quote will say how hidden damage will be handled and priced before the job starts, so there are no surprises on install day.
Should you repair or replace your gutters?
Repair makes sense when the problem is limited to a few spots; replacement makes sense when problems show up along most of the system. A typical gutter repair in San Antonio runs $150–$650, which covers resealing corners, re-hanging a sagging run, replacing a section, or fixing a downspout.
- Repair if you have one or two leaking corners, a single sagging section, a loose downspout, or a small dent from a falling branch.
- Replace if seams leak in many places, the gutters are pitched backward along whole runs, hail dented most of the system, or the gutters are undersized and overflow every heavy rain.
- Rule of thumb: if repair quotes approach a third or more of the cost of new seamless gutters on an older system, replacement is usually the better value.
How long does gutter installation take?
Most single-story San Antonio homes are done in one day, and many two-story homes are also finished in a day. Larger homes, copper or half-round systems, significant fascia repair, or underground drain lines can stretch a job to two or three days. Because seamless gutters are formed on site, there is usually no wait for custom lengths to ship once materials and colors are confirmed.
How can you save money on new gutters?
The best ways to save are to choose the right size rather than the biggest, fix only the fascia that is actually damaged, and get two or three itemized quotes.
- Stick with 5-inch where it works. On a simple single-story roof with no large valleys, 5-inch seamless is usually plenty.
- Skip the gutters you do not need. Some eaves on San Antonio homes drain onto landscaping well away from the slab. See do you really need gutters in San Antonio.
- Bundle work. Replacing gutters, adding guards, and fixing fascia in one visit avoids paying setup twice.
- Check insurance after hail. If a storm dented your gutters, a claim may cover replacement. Document the damage with photos before anything is removed.
- Schedule outside peak season. Spring storm season is busy; late fall and winter scheduling is often easier.
What are red flags in a gutter quote?
The biggest red flag is a single lump-sum price with no linear footage, gauge, or downspout count written down. Without those, you cannot compare quotes or hold anyone to the scope.
- No measured footage, or a price quoted over the phone without anyone seeing the house.
- No gauge listed, or .027-gauge aluminum presented as premium.
- Spike-and-ferrule hangers instead of hidden hangers.
- No mention of what happens to rotted fascia if it is found during the job.
- Downspouts that empty right at the foundation with no extension, splash block, or drain.
- Old gutter removal and haul-off left out, then added later.
- A large cash deposit demanded before materials are ordered, or pressure to sign the same day.
For a full checklist of what to ask, read how to choose a gutter contractor. When you are ready, request a free written estimate and we will measure your home and itemize every line.
Frequently Asked Questions
How much does gutter installation cost in San Antonio?
Gutter installation in San Antonio typically costs $7–$12 per linear foot for 5-inch seamless aluminum and $9–$15 per foot for 6-inch. Most single-story homes fall between $1,300 and $2,600 including downspouts, and most two-story homes fall between $2,000 and $4,000. Guards, fascia repair, and underground drains are priced separately. These are typical 2026 estimates and vary with roof height and complexity.
How much do gutters cost for a 2,000 sq ft house?
A 2,000 sq ft single-story house in San Antonio usually needs about 150–180 feet of gutter and costs roughly $1,300–$2,600 in 5-inch seamless aluminum with downspouts. Choosing 6-inch gutters raises that to about $1,600–$3,200. A two-story home with the same square footage has more height and usually lands higher because the work is slower and the downspouts are longer.
How much does 100 feet of seamless gutter cost?
100 feet of 5-inch seamless aluminum gutter typically costs $700–$1,200 installed in the San Antonio area, or about $900–$1,500 in 6-inch. Downspouts are extra at $8–$14 per foot. Because setup and travel are similar for small and large jobs, short runs may carry a job minimum, so the per-foot price on very small projects can be higher.
Are 6-inch gutters worth the extra cost?
Six-inch gutters are worth it on large, steep, or two-story roofs, and wherever a roof valley dumps into one gutter run. They cost about $2–$3 more per foot than 5-inch but carry roughly half again as much water, which matters during San Antonio's intense downpours. On a simple single-story roof, 5-inch gutters with properly sized downspouts usually perform well.
Does the price include removing old gutters?
Not always. Removal and haul-off of old gutters typically adds $1–$2 per linear foot, and some contractors leave it off the first quote. Ask for it as a written line item so you can compare quotes fairly. If the fascia behind the old gutters is rotted, repair runs $8–$20 per foot and should also be addressed in writing before work begins.
Related Services
Gutter Installation
Seamless aluminum gutters measured, roll-formed and installed on-site to handle San Antonio’s hard, fast downpours.
Learn more →Seamless Gutters
Continuous aluminum gutters formed in our truck at your home, cut to the exact length of each roofline.
Learn more →Gutter Replacement
Old gutters out, new seamless gutters in, usually in a single day, with fascia checked and repaired along the way.
Learn more →Downspouts & Drainage
Properly sized downspouts and underground drain lines that carry roof water away from your slab foundation.
Learn more →More Guides
- Do You Really Need Gutters in San Antonio?
- Seamless vs. Sectional Gutters: Which Is Better for San Antonio Homes?
- 5-Inch vs. 6-Inch Gutters: Which Size Does a San Antonio Home Need?
- How to Choose a Gutter Contractor in San Antonio: 12 Questions to Ask
Prices and recommendations in this guide are general information for San Antonio-area homeowners and are not a quote or professional engineering, legal or insurance advice. Conditions at your home may differ.