Reviewed by the Gutter Installers San Antonio teamUpdated
Half-round gutters in San Antonio typically cost $14–$22 per linear foot in aluminum, $12–$20 in steel or Galvalume and $28–$45 in copper, installed (2026 estimates). They have a semicircular trough, hang on brackets and drain through round downspouts. Because a half-round holds less water than a K-style of the same width, larger roofs often need 6-inch half-round or extra downspouts.
| Half-round aluminum | $14–$22 per linear foot installed |
|---|---|
| Steel / Galvalume | $12–$20 per linear foot installed |
| Copper half-round | $28–$45 per linear foot installed |
| Common sizes | 5″ and 6″ with 3″ or 4″ round downspouts |
| Best fit | Historic, Craftsman, revival and farmhouse homes |
| Project time | 1–3 days for most homes |
Half-round gutters have a semicircular cross-section, the profile American homes used long before the flat-faced K-style gutter became standard. They hang from brackets or straps, drain through round downspouts, and give a roofline a softer, traditional look. In San Antonio they are made in aluminum, Galvalume or steel, and copper, so you can get the historic profile without paying copper prices.
Half-round suits Victorian, Craftsman and Spanish or Tudor revival homes in King William, Monte Vista, Olmos Park, Alamo Heights and Terrell Hills, older homes near downtown New Braunfels, and modern farmhouse builds with metal roofs. On a typical newer home, standard K-style aluminum gutters are the better value.
How much do half-round gutters cost in San Antonio?
Half-round gutters typically cost $14–$22 per linear foot in aluminum, $12–$20 in steel or Galvalume and $28–$45 in copper, installed. These are our 2026 San Antonio-area estimates. The final number depends on footage, stories, corners, bracket style and the downspout package.
| Material | Installed price per linear foot | Finish | Best fit |
|---|---|---|---|
| Half-round aluminum | $14–$22 | Painted colors or copper-tone | Historic look on a budget |
| Half-round steel / Galvalume | $12–$20 | Bare metallic or painted | Metal roofs, farmhouse style, hail exposure |
| Half-round copper | $28–$45 | Bright copper that patinas | Historic restorations, custom homes |
| Round downspouts | $8–$14 per lf | Matches gutter material | Smooth or corrugated, 3″ or 4″ |
National cost guides price half-round a little above K-style. HomeGuide (October 28, 2025) says half-round adds about $1–$2 per linear foot for its more specialized installation. HomeAdvisor (updated June 20, 2026) gives a wide $3–$34 per foot across all materials. Decorative brackets, conductor heads and copper downspouts push a job toward the top of any range.
Half-round aluminum, Galvalume or copper: which should you choose?
Pick aluminum if you want the traditional profile at roughly half the price of copper. Pick Galvalume for a standing-seam metal roof or a farmhouse look. Pick copper if the home is historic, the budget allows and you want gutters that never need paint.
- Half-round aluminum: light, rust-free, available in painted colors and copper-tone finishes. It will not develop a true patina. Heavier gauge resists dents better. See aluminum gutters for gauge and color details.
- Half-round Galvalume or steel: stiffer than aluminum and a natural match for metal roofs. Cut edges and scratches should be protected to limit corrosion.
- Half-round copper: the longest-lived option with basic care, soldered at seams and corners, and slowly darkening to brown. Details are on our copper gutters page.
Keep metals compatible. Copper should not touch aluminum or galvanized steel, because the two corrode where water runs between them. Brackets, straps, fasteners and downspouts should match the gutter metal.
Are half-round gutters big enough for San Antonio storms?
They can be, if they are sized for the roof. A half-round gutter holds less water than a K-style gutter of the same width, because the rounded trough has less volume. San Antonio averages roughly 32 inches of rain a year, and much of it falls in short, intense bursts, so capacity matters.
- Step up to 6-inch half-round on large or steep roof planes and where a valley empties into one run.
- Use 4-inch round downspouts or add a downspout to shorten long runs.
- Watch inside corners below valleys, where two roof planes send water to one spot.
- Keep pitch steady toward each outlet so water does not stand in the trough.
Our 5-inch vs 6-inch gutter guide explains how roof area and pitch drive sizing. The same logic applies to half-round, with a bit more margin.
How are half-round gutters installed?
Half-round gutters do not sit flat against the fascia the way K-style does, so they hang from brackets. The bracket type changes both the look and how much weight the system can carry.
- Fascia brackets mount to the face of the fascia board and are the most common choice.
- Roof straps fasten to the roof deck before roofing goes on and are mostly used on new roofs or where there is no usable fascia.
- Decorative cast or formed brackets are visible from the street and are popular on historic homes. Spacing matters as much as style, because brackets must carry wet leaves and water.
- Hidden-style hangers are available for some half-round systems when a cleaner line is wanted.
On older homes the fascia behind the old gutters is often soft from years of overflow. It has to be repaired before brackets go up. See fascia and soffit repair.
What accessories finish a half-round gutter system?
The details make half-round look right: round downspouts, end caps, outlets, and sometimes conductor heads or rain chains. Each one affects how well water is managed.
- Round downspouts: 3″ or 4″ diameter, smooth or corrugated. They match the profile and are standard on historic work.
- Conductor heads: box-shaped collectors at the top of a downspout that add capacity and a period-correct look.
- Rain chains: decorative, but they move less water than a downspout and splash in heavy rain. Use them on porches and small roof sections, with a basin or gravel bed below.
- Discharge: route downspouts to splash blocks, gravel or underground drain lines so water stays away from the foundation.
Do gutter guards fit half-round gutters?
Some do. Many guard products are made only for K-style gutters, so confirm compatibility before you buy. The rounded bottom of a half-round gutter has no inside corners and sheds small debris slightly better than K-style, but under live oaks, pecans and cedar elms it still needs regular cleaning. Compare options in our guide to gutter guard types, and see gutter cleaning for service intervals.
Do you need approval for half-round gutters in a historic district?
Possibly. Exterior changes in San Antonio’s local historic districts, such as King William and Monte Vista, may require design review by the City of San Antonio Office of Historic Preservation. Olmos Park and Alamo Heights are separate cities with their own offices. Confirm requirements for your address before work starts, and ask specifically whether a change in material or profile is treated differently from like-for-like replacement.
Get a half-round gutter estimate
We measure every roof edge, check the fascia, size the gutters and downspouts for your roof area, and price aluminum, Galvalume and copper side by side so you can see the difference. Request a free estimate.
Our Half-Round Gutters Process
Measure and assess
We measure every roof edge, check fascia condition and note architectural details and any historic-district questions.
Choose material and size
Compare aluminum, Galvalume and copper, and size the half-round and round downspouts for your roof area.
Prepare the fascia
Old gutters come down and any rotted fascia or trim is repaired so brackets have a sound mounting surface.
Hang and join
Gutters are pitched toward outlets on brackets spaced for wet debris loads, with compatible fasteners throughout.
Downspouts and discharge
Round downspouts are routed to splash blocks, gravel or drain lines, then the system is water-tested.
Half-Round Gutters Service Areas
We provide half-round gutters throughout San Antonio and the surrounding communities. Choose your area for local details:
- Alamo Ranch
- King William
- Leon Springs
- Medical Center
- Monte Vista
- Stone Oak
- The Dominion
- Timberwood Park
- Alamo Heights
- Boerne
- Bulverde
- Castle Hills
- Cibolo
- Converse
- Fair Oaks Ranch
- Garden Ridge
- Helotes
- Hill Country Village
- Hollywood Park
- Leon Valley
- Live Oak
- New Braunfels
- Olmos Park
- Schertz
- Selma
- Shavano Park
- Terrell Hills
- Universal City
- Windcrest
Half-Round Gutters FAQ
How much do half-round gutters cost in San Antonio?
Half-round gutters typically cost $14–$22 per linear foot in aluminum, $12–$20 in steel or Galvalume and $28–$45 in copper, installed, based on 2026 San Antonio-area estimates. Round downspouts run about $8–$14 per foot. Decorative brackets, conductor heads and copper downspouts add to the total, so get an itemized quote.
Are half-round gutters as effective as K-style gutters?
They work well when sized correctly, but a half-round gutter holds less water than a K-style gutter of the same width. On large or steep roof sections we often use 6-inch half-round, add a downspout or use 4-inch round downspouts to keep up with San Antonio’s heavy downpours. The rounded bottom sheds small debris slightly better.
Can I get half-round gutters in aluminum instead of copper?
Yes. Half-round aluminum gives you the traditional profile at roughly half the price of copper, in painted colors or a copper-tone finish. It will not patina like real copper, but it does not rust and is light on older fascia. Galvalume half-round is another option, especially on homes with metal roofs.
Are half-round gutters seamless?
They can be. Some contractors roll-form half-round aluminum on-site in continuous lengths, while copper and many steel half-round systems are assembled from sections with soldered or sealed joints. Ask how seams will be joined and how many joints each run will have, since joints are where leaks start.
What downspouts go with half-round gutters?
Round downspouts, usually 3 or 4 inches in diameter, in smooth or corrugated styles. They match the profile and are standard on historic homes. Use 4-inch downspouts on larger roof areas. Conductor heads can add capacity and a period look, and rain chains suit small porch roofs only.
Do half-round gutters need special brackets?
Yes. Half-round gutters hang from fascia brackets, roof straps or decorative brackets instead of mounting flat like K-style. Bracket spacing has to be close enough to carry wet leaves and water. Brackets and fasteners should match the gutter metal to avoid corrosion, especially with copper.
Related Services
Copper Gutters
Soldered copper gutter systems built to suit the Victorian, Craftsman and Spanish Revival homes of San Antonio’s older neighborhoods.
Learn more →Aluminum Gutters
Rust-free aluminum gutters in the gauge, size and color that suit your roof, formed to length at your home.
Learn more →Gutter Installation
Seamless aluminum gutters measured, roll-formed and installed on-site to handle San Antonio’s hard, fast downpours.
Learn more →Fascia & Soffit Repair
Rotted fascia replaced, soffits repaired and vents restored so your gutters hang on solid wood and pests stay out of the attic.
Learn more →